在max7000系列中, 只允许有两个输出使能信号, 可在设计中却存在三个, 每次编译时出现“device need too many
output enable signal”. 如果不更换器件(使用的是max7064lc68). 如何解决这个问题?
在max7000系列中, 只允许有两个输出使能信号, 可在设计中却存在三个, 每次编译时出现“device need too many
output enable signal”. 如果不更换器件(使用的是max7064lc68). 如何解决这个问题?