The CYBLE-01201x-x0 is a turnkey Bluetooth‚ Low Energy (BLE) wireless module solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PRoC™ BLE. The CYBLE-012011-00 includes FCC/IC/KC/MIC/CE RF certification and Bluetooth SIG qualification. The CYBLE-012012-10 module does not include RF certifications or Bluetooth SIG qualification.
The CYBLE-01201x-x0 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-01201x-x0 includes 128KB of Flash and 16KB of SRAM.
The CYBLE-01201x-x0 includes a royalty-free BLE stack compatible with Bluetooth 4.1 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package. The CYBLE-012011-00 is qualified with Bluetooth SIG, and is certified for RF compliance with FCC, IC, CE, MIC, and KC regulatory agencies.
Module Description
-
Module size: 14.52 mm × 19.20 mm × 2.00 mm (with shield)
-
Bluetooth 4.1 single-mode module
-
Industrial temperature range: –40 °C to +85 °C
-
32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
-
128-KB flash memory
-
16-KB SRAM memory
-
Watchdog timer with dedicated internal low-speed oscillator (ILO)
-
Two-pin SWD for programming
-
Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
-
Certified to FCC, CE MIC, KC, and IC regulations (CYBLE-012011-00 only)
-
Bluetooth SIG 4.1 qualified (CYBLE-012011-00 only)
-
The CYBLE-01201x-x0 is a turnkey Bluetooth‚ Low Energy (BLE) wireless module solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PRoC™ BLE. The CYBLE-012011-00 includes FCC/IC/KC/MIC/CE RF certification and Bluetooth SIG qualification. The CYBLE-012012-10 module does not include RF certifications or Bluetooth SIG qualification.
The CYBLE-01201x-x0 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-01201x-x0 includes 128KB of Flash and 16KB of SRAM.
The CYBLE-01201x-x0 includes a royalty-free BLE stack compatible with Bluetooth 4.1 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package. The CYBLE-012011-00 is qualified with Bluetooth SIG, and is certified for RF compliance with FCC, IC, CE, MIC, and KC regulatory agencies.
Module Description
-
Module size: 14.52 mm × 19.20 mm × 2.00 mm (with shield)
-
Bluetooth 4.1 single-mode module
-
Industrial temperature range: –40 °C to +85 °C
-
32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
-
128-KB flash memory
-
16-KB SRAM memory
-
Watchdog timer with dedicated internal low-speed oscillator (ILO)
-
Two-pin SWD for programming
-
Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
-
Certified to FCC, CE MIC, KC, and IC regulations (CYBLE-012011-00 only)
-
Bluetooth SIG 4.1 qualified (CYBLE-012011-00 only)
-