【天祥TX-1C增强版51单片机开发板试用体验】+DA波形

  • 建模太难了
  • LV3工程师
  • |      2017-08-19 16:34:43
  • 浏览量 749
  • 回复:4
用到的DA为电流输出型的,故在用示波器观察输出时,会发现在电压到达一定值时,出现了被削平的现象。 此处只是示意下DA的使用,当然,若DA芯片为电压输出型时,就可得到完美的波形。 简易正弦波发生器 //可观察到发光二极管由灭到亮,而后由亮到灭。 //若用示波器观察IOUT引脚电平,可看到正弦波波形。

#include

sbit wela=P2^7;

sbit dula=P2^6;

sbit dawr=P3^6;

sbit csda=P3^2;

unsigned char j,k;

char code dat={0x80,0x83,0x86,0x89,0x8d,0x90,0x93,0x96,0x99,0x9c,0x9f,

0xa2,0xa5,0xa8,0xab,0xae,0xb1,0xb4,0xb7,0xbc,0xbf,0xc2,0xc5,0xc7,0xca,

0xcc,0xcf,0xd1,0xd4,0xd6,0xd8,0xda,0xdd,0xdf,0xe1,0xe3,0xe5,0xe7,0xe9,0xea,

0xec,0xee,0xf1,0xf2,0xf4,0xf5,0xf6,0xf7,0xf8,0xf9,0xfa,0xfa,0xfb,0xfc,0xfd,

0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,

0xff,0xff,0xff,0xfe,0xfd,0xfd,0xfc,0xfb,0xfa,0xf9,0xf8,0xf7,0xf6,0xf5,0xf4,

0xf3,0xf2,0xf1,0xef,0xee,0xec,0xea,0xe9,0xe7,0xe5,0xe3,0xe1,0xde,0xdd,0xda,

0xd8,0xd6,0xd4,0xd1,0xcf,0xcc,0xca,0xc7,0xc5,0xc2,0xbf,0xbc,0xba,0xb7,0xb4,

0xb1,0xae,0xab,0xa8,0xa5,0xa2,0x9f,0x9c,0x99,0x96,0x93,0x90,0x8d,0x89,0x86,

0x83,0x80,0x80,0x7c,0x79,0x76,0x72,0x6f,0x6c,0x69,0x66,0x63,0x60,0x5d,0x5d,

0x5a,0x57,0x55,0x51,0x4e,0x4c,0x48,0x45,0x43,0x40,0x3d,0x3a,0x3a,0x38,0x35,

0x33,0x30,0x2e,0x2b,0x29,0x27,0x25,0x22,0x20,0x1e,0x1c,0x1a,0x18,0x16,0x15,

0x13,0x11,0x10,0x0e,0x0d,0x0b,0x0a,0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,

0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,

0x02,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0d,0x0e,0x10,0x11,

0x13,0x15,0x16,0x18,0x1a,0x1c,0x1e,0x20,0x22,0x25,0x27,0x29,0x2b,0x2e,0x30,

0x33,0x35,0x38,0x3a,0x3d,0x40,0x43,0x45,0x48,0x4c,0x4e,0x51,0x55,0x57,0x5a,

0x5d,0x60,0x63,0x66,0x69,0x6c,0x6f,0x72,0x76,0x79,0x7c,0x80};

void delay(unsigned char i)

{

for(j=i;j>0;j--)

for(k=125;k>0;k--);

}

void main()

{

wela=0;

dula=0;

csda=0;

dawr=0;

while(1)

{

unsigned char m;

for(m=0;m<292;m++)

P0=dat;

delay(10);

}

}

  • 0
  • 收藏
  • 举报
  • 分享
我来回复

登录后可评论,请 登录注册

所有回答 数量:4
lygo 2017-09-06
感觉挺厉害啊
0   回复
举报
发布
13580826064 2017-08-24
6666666666666
0   回复
举报
发布
青青_子衿 2017-08-23
好厉害,我现在连51都使不顺
0   回复
举报
发布
qq1328512480 2017-08-22
效果图?
0   回复
举报
发布
x
收藏成功!点击 我的收藏 查看收藏的全部帖子