图像不动正常,如果动一下就会出现部分绿画频,过会又会自己好,这种是什么问题
已经下载安装好了,请问通过什么命令使用里面的功能,或者可以自己另外写图像处理算法吗
有些我用usb供电芯片对外输出,有的直接把设备5v对外,是不是直接5v加一个自恢复保险输出有什么缺点?
有没有8触摸的芯片,通过io或者其他接口给单片机通讯,单片机没有触摸io接口
用供电电线载波有没有什么办法,通讯通讯有10km,通讯速率可以很慢,有没有电路参考
网上2.4g比较多,有没有5.8g的用单片机控制通讯的,距离20米就够了
8×8的热成像传感器为什么那么贵,有没有便宜些的热成像传感器,像素200以上就够了
激光打印机可以下载到linux驱动,可以移植到stm32吗
编译信息如下,请问该如何修改代码或者库文件?Rebuild target 'STM32F103C8x'compiling main.c...compiling gpio.c...compiling tim.c...compiling usart.c...compiling stm32f1xx_it.c...compiling stm32f1xx_hal_msp.c...compiling gizwits_product.c...compiling gizwits_protocol.c.....\Gizwits\gizwits_protocol.c(185): warning: #550-D: variable "lastReportTime" was set but never used static uint32_t lastReportTime = 0;..\Gizwits\gizwits_protocol.c(186): warning: #550-D: variable "currentTime" was set but never used uint32_t currentTime = 0;..\Gizwits\gizwits_protocol.c: 2 warnings 0 errorscompiling hal_key.c...compiling common.c...compiling dataPointTools.c...compiling ringbuffer.c...compiling stm32f1xx_hal_gpio_ex.c...compiling stm32f1xx_hal_tim.c...compiling stm32f1xx_hal_tim_ex.c...compiling stm32f1xx_hal.c...compiling stm32f1xx_hal_rcc.c...compiling stm32f1xx_hal_rcc_ex.c...compiling stm32f1xx_hal_gpio.c...compiling stm32f1xx_hal_dma.c...compiling stm32f1xx_hal_cortex.c...compiling stm32f1xx_hal_pwr.c...compiling stm32f1xx_hal_flash.c...compiling stm32f1xx_hal_flash_ex.c...compiling stm32f1xx_hal_exti.c...compiling stm32f1xx_hal_uart.c...assembling startup_stm32f10x_md.s...compiling system_stm32f10x.c...linking....\STM32F103C8x\STM32F103C8x.axf: Error: L6218E: Undefined symbol APBPrescTable (referred from stm32f1xx_hal_rcc.o).Not enough information to list image symbols.Finished: 1 information 0 warning and 1 error messages.".\STM32F103C8x\STM32F103C8x.axf" - 1 Error(s) 2 Warning(s).Target not created.Build Time Elapsed: 00:00:28相对应代码如下:stm32f1xx_hal_rcc.c53 extern const uint8_t APBPrescTable[8U]; /@@*!< APB prescalers table values */1190 return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_Pos]);1202 return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_Pos]);
使用PWM模块连恒流驱动电源控制LED时,发现并不能调节LED亮度,请问是我使用的这个恒流驱动电源的问题还是PWM不能连恒流驱动电源来调节LED亮度呢?
PWM不是通过改变输出时间来控制LED亮度的吗?但是我用PWM模块接恒流驱动电源再接LED却发现改变PWM占空比并不能调节LED亮度,但是如果PWM模块串联分压电阻直连LED时,就能通过改变占空比改变LED亮度,但是此时通过LED的电流却又很小只有0.0几A,请问是不是恒流驱动电源不能使用PWM吗?应该换恒压驱动电源吗?
寄存器地址和设备地址要怎么设置,网上买的modbus rtu服务器
不动原来的镜头,可以添加什么镜头让他成为广角镜头吗
stm32f429怎么驱动usb摄像头并在lcd屏上显示,usb的uvc驱动怎么从linux移植到stm32f429